You can set the priority codes for the products that you are requesting.
There are 3 priority codes: 1 - first priority; 2.- second priority; 3 - lowest priority.
Note: The priority codes are only applicable to the products in the buffered (unmapped) or in production status. The products with no specified priority code are being automatically added to the production queue based on the request date and the bandwidth consumption.
There are two ways to set the priority codes:
Upload in the PRC file.
The priority tag, e.g. “<PRIORITY>1</PRIORITY>” should be added into the 6th column of the PRC file.
If you use this column also for specifying the products UPC/EAN code, just add this tag to the UPC/EAN tag, e.g.: “<PRIORITY>1</PRIORITY><UPCEAN>545698532569785</UPCEAN>”.
Note: The upper cases are required. The order of the tags does not matter. As soon as the product shows up on the Extranet (usually within a day), you can see its priority in the Search your SKUs section.
Extranet / Search your SKUs section.
In this section, you may select the required products in the SKU Search Form on the right side and enter the priority code in “Set SKU Priority” and click “Update”.
Note: If the priority codes are set via the Extranet then there is a limitation of how many products can be set up with the Priority 1 and 2.
Priority 1 limitation equals your daily bandwidth limit times 5.
Priority 2 limitation equals your daily bandwidth limit times 15.
There is no limit if the Priority Codes are submitted in the PRC file.
