topic Re: net weight/gross weight not jiving in Ask A Question for Albertsons

net weight/gross weight not jiving

jackieb — Tue, 13 Feb 2024 19:28:06 GMT

I can't understand, what i'm doing wrong. I think my math is right, but it won't publish because of these errors.

These are my numbers. Can anyone see my problem? I know there is a 4% give..and these are 4%.

case net: 17.4 case gross: 18.0

unit net: 1.45 unit gross: 1.5

This is a 12pk. It has a problem with my direct link quantities too?

i have 1 in the unit, and 12 in the case.

anyone understand and can help the issue?

if a 1ws person comes up...my gtin is 00613008770174. this only has the case and unit, no others in heirarchy.

gln: 0613008000004.

thank you.

Re: net weight/gross weight not jiving

CommunityJedi22 — Tue, 13 Feb 2024 19:39:04 GMT

Hello @jackieb I hope your week is going well. It is nice to chat with you again. Please take a look below as your Case weights must be, at a minimum, the same as your Each weight multiplied by the number of Eaches in a Case, which you have as 70.

Case (qty 70)

GW = 18
NW = 17.4
NC = 244.8

Each

GW = 1.52
NW = 1.45
NC = 20.4

Case Min
GW = 1.52 x 70 = 106.4
NW = 1.45 x 70 = 101.5
NC = 20.4 x 70 = 1428

Re: net weight/gross weight not jiving

jackieb — Tue, 13 Feb 2024 21:29:13 GMT

oooh, so no, my case quantity is 12.

The pallet has 70. so, basically, i should find where i have 70...and make it a 12?

where the how many on a layer and how many high for a pallet, i just write the 10 x 7, but don't need to put 70 in?

Thank you so much for answering also!!

Re: net weight/gross weight not jiving

jackieb — Tue, 13 Feb 2024 21:29:45 GMT

oops, see reply, before this.

Re: net weight/gross weight not jiving

CommunityJedi22 — Tue, 13 Feb 2024 21:33:42 GMT

@jackieb This is where I got the 70: